![]() The Resideo app is actually not bad, it gives me full control over both thermostats. I was able to immediately connect it to the Resideo app, which is really what I wanted. I removed the T6 and plugged the T9 into the same wall adapter. The best part is that it was literally plug and play. I wanted more control so I decided to upgrade to the T9. Both connect to wifi and both should work with the Resideo app, but I could not get the T6 into the right mode to set it up. T6 connects to Z-Wave, which makes using it with a security system easier (plus Ring only supports two thermostats if they are connected to Z-Wave). T6 has battery backup (I don’t really care as long as it doesn’t lose its programming). There are a couple of differences with the T6 compared to T9. The T6 also does not support remote thermostats, which really is a game changer. Due to the way the T6 was installed in contractor mode, I could not get them to connect to the Resideo app. ![]() You either need to use the touchscreen on the thermostat or the app to make the most of it. They worked well with the Ring system that came with the house, but that control is limited to the mode and temperature. The builder pre-installed Honeywell T6 thermostats, which left a lot to be desired. ![]() We recently moved into a brand new house with two separate HVAC systems, one for the main level and basement, one for the top floor with the bedrooms. ![]() That really only leaves two choices of thermostats, the Honeywell T9/T10 or Ecobee. It is great being able to place sensors inside of rooms instead of having to hope that your hallway is the right temperature. ![]() If you have never used a thermostat with remote sensors, you really don’t know what you are missing. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |